Intro

01

Extrusion

02

Short anodizing line

03

Long anodizing line

04

Powder Coating Line

05

Alodine2040 passivation

06

Fabrication

07

Automated Handling

08

Quality Assurance

Post Image

Specialised Equipment

01 Extrusion

  • Direct presses 25MN & 35MN
  • Automated log storage
  • Gas and induction heated saw cut to length billets
  • Water and air quenching
  • Double bench double puller with controlled cooling, 64m length
  • Up to 14.2m final cutting saw
  • Fully automated stacking and aging processes
  • Bottom loaded single and double chamber aging ovens ±1.5?C accuracy

BS EN Standards for Billet Casting & Profile Extrusion

BS EN 573-3:2013Aluminium and aluminium alloys; Chemical composition and form of wrought products; Chemical composition and form of products
BS EN 12020-2:2008Aluminium and aluminium alloys; Extruded precision profiles in alloys EN AW-6060 and EN AW-6063; Tolerances on dimensions and form
BS EN 755-9:2008Aluminium and aluminium alloys; Extruded rod/bar, tube and profiles; Profiles, tolerances on dimensions and form
BS EN 755-2:2013Aluminium and aluminium alloys; Extruded rod/bar, tube and profiles; Mechanical properties
BS EN 14024:2004Metal profiles with thermal barrier; Mechanical performance; Requirements, proof and tests for assessment
BS EN 12020-1:2008Aluminium and aluminium alloys; Extruded precision profiles in alloys EN AW-6060 and EN AW-6063; Technical conditions for inspection and delivery
Scroll down
Post Image

Specialised Equipment

02 Short anodizing line

  • Based on QUALANOD requirements and DIN17611
  • Fully automated line with 6 cranes
  • Maximum profile length: 7,200mm
  • Layer thickness: 5-25 microns
  • Hot water sealing
Scroll down
Post Image

Specialised Equipment

03 Long anodizing line

  • Based on QUALANOD requirements and DIN17611
  • Fully automated line with 3 cranes
  • Maximum profile length: 14,200mm
  • Layer thickness: 5-25 microns

QUALANOD Standards for Anodizing

ISO 21432010 Anodizing of aluminium and its alloys - estimation of loss of absorptive power of anodic oxidation coatings after sealing - dye spot test with prior acid treatment
ISO 2931:2010Anodizing of aluminium and its alloys - assessment of quality of sealed anodic oxidation coatings by measurement of admittance
ISO 8251:2011Anodizing of aluminium and its alloys - measurement of abrasion resistance of anodic oxidation coatings
ISO 1463:2003Metallic and oxide coatings - measurement of coating thickness - microscopical method
ISO 2360:2003Non-conductive coatings on non-magnetic electrically conductive basis metals; Measurement of coating thickness; Amplitude-sensitive eddy current method
ISO 2135:2010Anodising of aluminium and its alloys - accelerated test of light fastness of coloured anodic oxide coatings using artificial light
ISO 9227:2012Corrosion tests in artificial atmospheres - salt spray tests
ISO 3210:2010Anodizing of aluminium and its alloys - assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution
ISO 6581:2010Anodizing of aluminium and its alloys - determination of the comparative fastness to ultra-violet light and heat of coloured anodic oxidation coatings
ISO 7668:2010Anodizing of aluminium and its alloys - measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20°, 45°, 60° or 85°
ISO 6719 2010Anodizing of aluminium and its alloys - measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
ISO 7759:2010Anodizing of aluminium and its alloys - measurement of reflectivity characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer
ISO 3211:2010Anodizing of aluminium and its alloys - assessment of resistance of anodic oxidation coatings to cracking by deformation
ISO 2085:2010Anodizing of aluminium and its alloys - check for continuity of thin anodic oxidation coating - copper sulphate test
ISO 2376:2010Anodizing of aluminium and its alloys - determination of electric breakdown potential
ISO 8993:2010Anodizing of aluminium and its alloys - rating system for the evaluation of pitting corrosion - chart method
ISO 8994:2011Anodizing of aluminium and its alloys - rating system for the evaluation of pitting corrosion - grid method
BS 6161-18:1991Methods of test for anodic oxidation coatings on aluminium and its alloys - Part 18: determination of surface abrasion resistance
Scroll down
Post Image

Specialised Equipment

04 Powder Coating Line

  • According to QUALICOAT requirements
  • Maximum profile length: 8,200mm
  • Fully automated line
  • Chrome-free conversion technology
  • Gema magic cylindrical booth

QUALICOAT Standards for Powder Coating

ISO 2813:2014Paints and varnishes - determination of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees
ISO 2360:2003Non-conductive coatings on non-magnetic electrically conductive basis materials - measurement of coating thickness - amplitude-sensitive eddy current method
ISO 2409:2013Paints and varnishes - cross-cut test
ISO 2815:2003Paints and varnishes - Buchholz indentation test
ISO 1520:2006Paints and varnishes - cupping test
ISO 1519:2011Paints and varnishes - bend test (cylindrical mandrel)
ISO 6272- 2:2011Paints and varnishes - rapid-deformation (impact resistance) tests; Part 2: falling-weight test, small-area indenter
ISO 4628-2:2003Paints and varnishes - evaluation of degradation of coatings - designation of quantity and size of defects, and of intensity of uniform changes in appearance; Part 2: assessment of degree of blistering
EN 12206-1:2004Paints and varnishes - coating of aluminium and aluminium alloys for architectural purposes; Part 1: Coatings prepared from coating powder
Scroll down
Post Image

Specialised Equipment

05 Alodine2040 passivation

  • Chrome-free passivation
  • Coating weight: 2-10mg/m2
  • Low surface resistance, after long storage
  • Guarantee of weldability
  • Guarantee of long-term bonding
Scroll down
Post Image

Specialised Equipment

06 Fabrication

  • State-of-the-art fabrication unit providing services for crimping, precision CNC machining and customized cut-to-length profiles
  • Mechanical properties of crimped profiles are tested as per BS EN 14024 and comply with international standards
  • 5 & 3 – axis CNC machines
  • Double & single head cutting saws
  • Stretch bending machines
  • Precision machining
Punching & welding applications
Scroll down
Post Image

Specialised Equipment

07 Automated Handling

  • Fully automated die storage and die handling system with storing capacity of 7,000 pieces
  • Fully automated finished goods storage with capacity of 4,000 crates
  • Fully automated extruded profiles management and handling by three overhead cranes
  • Fully automated profiles management before and after aging process with bottom loaded aging furnaces
Scroll down
Post Image

Quality Assurance

08 Quality Assurance

TALEX is committed to ensuring our products and process quality comply with international standards.

TALEX will:

  • Deliver the right material to customers by understanding their needs and expectations
  • Understand our customer’s process and application, ensuring we deliver material with added value. For example, compatible packing for facilitation of handling and storing
  • Deliver products to our customers on time
  • Implement a quality acceptance criteria and a supplier evaluation system for the selection of suppliers and raw materials
  • Ensure all corrective and preventive actions are in place to address customer complaints on time and ensure there can be no repetition of the same complaint
  • Ensure adequate training, communication and motivational activities for all of our employees in order to enhance performance, skill and retain resources
  • Implement a suitable and effective ERP system, for integration of operations, recording of data and traceability of material, ensuring we perform our business activities efficiently
  • Ensure all working procedures are updated when necessary and compliant with relevant international standards
Scroll down